User's Manual

Chapter 4: Web Configuration
20
Encryption
Select desired security type from the pull-down menu None, WEP, WPA,
WPA2 and WPA2-Mixed. The default setting is None. It is strongly
recommended to set up security mode (WEP, WPA, WPA2 and WPA2-
Mixed) to prevent any unauthorized accessing.
WEP
Key Length: Select key length 64-bit or 128-bit.
Key Format:
 Hexadecimal (WEP 64 bits): 10 Hex characters (0~9, a~f).
 Hexadecimal (WEP 128 bits): 26 Hex characters (0~9, a~f).
 ASCII (WEP 64 bits): 5 ASCII characters (case-sensitive).
 ASCII (WEP 128 bits): 13 ASCII characters (case-sensitive).
Key Setting: Enter the key in the key setting field.
WPA/ WPA2/ WPA2-Mixed
Pre-Shared Key Format: There are two formats for choice to set the Pre-
shared key, Passphrase and Hex (64 characters). If Hex is selected, users
will have to enter a 64 characters string. For easier configuration, the
Passphrase (at least 8 characters) format is recommended.
Pre-Shared Key : Pre-Shared Key serves as a password. Users may key in 8
to 63 characters string if you selected passphrase. Pre-shared key format to
set the passwords or leave it blank, in which the 802.1x Authentication will
be activated. Make sure the same password is used on client's end.