User's Manual

Chapter 3: Installation

Router Mode

Connect via wireless…

Step 1. Power on the wireless router first, connect the Wireless Router with a power to an outlet.

Step 2. Then, connect the computer with the wireless router via wireless LAN interface.

Step 3. After make a connection and set up(please refer to TCP/IP Settings> WAN Interface

Setup) successfully, connect the ADSL or cable modem with an cable to the Ethernet

port(act as WAN port here). If your modem came with a cable, use the supplied cable.

2.1. Make sure the c. Connection between your computer and Wireless Router setup successfully.

2. Start your Web Browser.

3. In the Address box, enter the IP address of the Wireless Router, as in this example, which uses the

Wireless Router's default IP address: http://192.168.1.254