User's Manual

Configuration via Web

Wireless Mode

Select a wireless mode and then click the Setup button to enter its configuration page.

Wireless Mode

When acting as an access point, this device connects all the stations

(PC/notebook with wireless network adapter) to a wired network.

All stations can have the Internet access if only the Access Point

has the Internet connection.

Select GW will enter the gateway mode. This means that the

wireless connection will be set up from a point-to-point wireless

LAN into a point-to-multipoint WAN.

AP Mode

AP Mode Settings

Alias Name

Display the name of this device.

Disable

Wireless

LAN

Interface

Check the box to disable the Wireless LAN Interface, by so doing, you

won’t be able to make wireless connection with this Access Point in the

network you are located. In other words, this device will not be visible by

any wireless station.

Band

You can choose one mode of the following you need.

 2.4GHz (B): 802.11b supported rate only.

 2.4GHz (G): 802.11g supported rate only.

 2.4GHz (B+G): 802.11b supported rate and 802.11g supported rate.