User's Manual

4
Configuration
Login
1. Start your computer. Connect an Ethernet cable between your computer and the Wireless
Portable Router.
2. Make sure your wired station is set to the same subnet as the Wireless Portable Router,
i.e. 192.168.1.254
3. Start your WEB browser. In the Address box, enter the following:
HTTP://192.168.1.254
The configuration menu is divided into four categories: Status, Wireless, TCP/IP, and
Other settings. Click on the desired setup item to expand the page in the main
navigation page. The setup pages covered in this utility are described below.
No username and password required for the fist login, however, you can set up a set of
username and password for the future security, for detailed configuration, please refer to the
Password in the later section of Configuration.
Common Connection Types
Cable Modems
Type Details ISP Data required
Dynamic
IP Address
Your IP Address is allocated
automatically, when you
connect to you ISP.
Usually, none.
However, some ISP's may
require you to use a particular
Hostname, Domain name, or
MAC (physical) address.
Static (Fixed)
IP Address
Your ISP allocates a
permanent IP Address to you.
IP Address allocated to you.
Some ISP's may also require
you to use a particular
Hostname, Domain name, or
MAC (physical) address.
DSL Modems
Type Details ISP Data required
Dynamic
IP Address
Your IP Address is allocated
automatically, when you
connect to you ISP.
None.
Static (Fixed)
IP Address
Your ISP allocates a
permanent IP Address to you.
IP Address allocated to you.
PPPoE You connect to the ISP only
when required. The IP address
is usually allocated
automatically.
User name and password.