User's Manual

17
this Access Point. All stations communicating with the Access
Point must use the same channel.
Encryption
WEP Encryption (Wired Equivalent Privacy) is set to
Disabled by default. When WEP is enabled, data packet is
encrypted before being transmitted. The WEP prevents data
packets from being eavesdropped by unrelated people. By
using WEP data encryption, there may be a significant
degradation of the data throughput on the wireless link.
Associated Clients
Displays the total number of clients associated to this AP. You
can have up to 64 clients to associate to this Access Point.
BSSID
BSSID displays the ID of current BSS, which uniquely
identifies each BSS. In AP mode, this value is the MAC
address of this Access Point.
LAN Configuration
Connection Method
Shows the currently used connection method.
Physical Address
Shows the MAC address of this device.
IP Address
Shows the LAN IP address.
Network Mask
Shows the LAN subnet mask.
Default Gateway
Shows the LAN default gateway.
DHCP Server
Shows the current DHCP Server status.
DHCP Start IP Address
Shows the DHCP Start IP address.
DHCP Finish IP
Address
Shows the DHCP Finish IP address.
Internet Configuration
Connection Method
Shows the current used internet connection method.
Physical Address
Shows the MAC address of this device.
IP Address
Shows the Internet IP address
Network Mask
Shows the subnet mask IP address.
Default Gateway
Shows the Internet default gateway.
Refresh
Click to refresh the current system data.
Active Clients
Displays the wireless clients that are currently connecting with this Wireless Portable Router.
Refresh
Click to refresh the Active Wireless Client table.