User's Manual

Reset: Click to restore to the default values.

Current Filter Table: Shows

Delete Selected: Select the unwanted MAC addresses and then click the

Delete Selected button to eliminate them

Delete All: Click to delete all the MAC addresses in the tale

Reset: Click to clear the current settings

Apply

Changes

Click to save the current settings.

Reset

Click to reset this page.

Status

System Data

Uptime

The time period since the device was up.

Firmware Version

The current version of the firmware installed in this device.

Wireless

Mode

There are four modes supported, Access Point, Client (Ad-

hoc and Infrastructure), WDS Bridge and WDS repeater.

The default mode is Access Point.

Band

Displays the current band in use.

SSID

The SSID differentiates one WLAN from another, therefore,

all access points and all devices attempting to connect to a

specific WLAN must use the same SSID. It is case-sensitive

and must not exceed 32 characters. A device will not be

permitted to join the BSS unless it can provide the unique

SSID. An SSID is also referred to as a network name because

essentially it is a name that identifies a wireless network.

Channel Number

The number of channels su

orted de

ends on the re

ion of