User's Manual

WAN Port

WAN Access Type: Select the WAN access type (Static IP, DHCP, PPPoE

and PPTP) from the pull-down menu.

Attain DNS Automatically:

Set DNS Manually:

DNS1~3: Enter the DNS server IP address(es) provided by your ISP, or you

can specify your own preferred DNS server IP address(es).

DNS 1 and DNS 2 servers are optional. You can enter another DNS server’s

IP address as a backup. DNS 1 and DNS 2 servers will be used when the

DNS 1 server fails.

Respond to WAN Ping:

Enable UPnP: Universal Plug and Play (UPnP) allows Windows Me and XP

to automatically configure the Router for various Internet applications, such

as gaming and videoconferencing. If you want to use UPnP, select Enable

UPnP.

Save: Click to save and apply the current settings.

Close: click to exit the current settings.

Virtual Server

Enable Virtual Servers: Check to enable the Virtual Server function.

Local IP Address: Enter the Local Server’s IP address.

Protocol: Select the protocol (TCP, UDP or Both) used to the remote system

or service.

Port Range: For TCP and UDP Services, enter the beginning of the range of

port numbers used by the service. If the service uses a single port number,

enter it in both the start and finish fields.

Description: You may key in a description for the local IP address.

Save: Click to save and apply the current settings.

Reset: Click to clear and rest the current settings.

Current Virtual Servers table: Shows the current virtual servers

information.

DMZ

Enable DMZ: If the DMZ Hos

Function is enabled

it means that

ou set u