User's Manual

MAC Address.

Apply Changes: Press to save the new settings on the screen.

Reset: Press to discard the data you have entered since last time you press

Apply Change.

Delete Selected: To delete clients from access to this Access Point, you

may firstly check the Select checkbox next to the MAC address and

Comments, and press Delete Selected.

Delete All: To delete all the clients from access to this Access Point, just

press Delete All without selecting the checkbox.

Reset: If you have made any selection, press Reset will clear all the select

mark.

Apply

Changes

Click to save the current settings.

Reset

Click to reset this page.

GW mode

GW Mode Settings

Alias Name

Display the name of this device.

Disable

Wireless

LAN

Interface

Check the box to disable the Wireless LAN Interface, by so doing, you

won’t be able to make wireless connection with this Portable Router in the

network you are located. In other words, this device will not be visible by

any wireless station.

Band

You can choose one mode of the following you need.

 2.4GHz (B): 802.11b supported rate only.

 2.4GHz (G): 802.11g supported rate only.

 2.4GHz (B+G): 802.11b supported rate and 802.11g supported rate.

The default is 2.4GHz (B+G) mode.

SSID

The SSID differentiates one WLAN from another, therefore, all access

points and all devices attempting to connect to a specific WLAN must use

the same SSID. It is case-sensitive and must not exceed 32 characters. A