User's Manual

6
Power Green - On: Power on
- Blinking after 60 seconds: The LED indicator will blink in standby mode.
- Blinking during 10 seconds: The REBOOT function has been active.
- Blinking during 120 seconds time out: The REBOOT function has been
failed.
- Off: Power off
Wifi Green on: WPS is enabled
off: Wifi is ready or WPS failed
blinking: wireless traffic transmitting or WPS syncing
Green - On: The device detects another HomePlug device. The PHY rate is greater
than 80 Mbps.
- Off: The HomePlug port does not detect another HomePlug device.
- Blinking: Data is being transmitted and/or received.
Amber -On: The device detects another HomePlug device. The PHY rate is
between 20~80Mbps.
- Off: The HomePlug port does not detect another HomePlug device.
- Blinking: Data is being transmitted and/or received.
HomePlug
Red - On: The device detects another HomePlug device. The PHY rate is
between 0~20Mbps.
- Off: The HomePlug port does not detect another HomePlug device.
- Blinking: Data is being transmitted and/or received.
Ethernet 1 Green - On: 10/100 Mbps Link successfully
- Fast Blinking: 10/100 Mbps Tx/Rx
- Off: Link off
Ethernet 2 Green - On: 10/100 Mbps Link successfully
- Fast Blinking: 10/100 Mbps Tx/Rx
- Off: Link off