User's Manual

WPA-PSK / WPA2-PSK (Wi-Fi Protected Access using Pre-Shared Key) is recommended

for users who are not using a RADIUS server in a home environment and all their clients

support WPA-PSK / WPS2-PSK. This method provides a better secure connection.

If WPS-PSK or WPA2-PSK is used, the Wireless Stations and the HomePlug AV

must have the same security settings.

REBOOTion Pass phrase

TKIP 8-63 characters for Pass Phrase

64 characters for HEX number(0~9, a~f)

Wireless LAN Configuration

To allow Wireless Stations to use the HomePlug AV, the Wireless Stations and HomePlug

AV must use the same settings, as follows:

Mode The mode must be set to Infrastructure mode.

SSID (ESSID) The network name must match the value used on the HomePlugAV.

Note: The SSID is case sensitive.

Open

Shared Key

If there is no security is enabled on the HomePlugAV, the security of each

station should be disabled as well. And, you can connect the HomePlugAV

without security, but it is NOT recommended.

WEP Key By default, WEP on the HomePlugAV is disabled.

 If WEP remains disabled on the HomePlugAV, all station must have WEP

disable.

 If WEP is enabled on the HomePlugAV, each station must use the same

settings as the HomePlugAV.

WPA-PSK

WPA2-PSK

WPA2-Mixed

WPS-PSK (TKIP/AES) / WPA2-PSK (TKIP/AES): If one of this these securities

is enabled on the HomePlugAV. To make a connection, each station must use

the same algorithms and pass phrase as the HomePlugAV.

WPA-PSK / WPA2-PSK

ireless LAN Configuration