User's Manual

Wireless Access Control

Set access control policy of the station. Select Disable, Allow or Deny from pull-down

menu. If you select Allowed ACL MAC, only those clients whose wireless MAC

addresses are in the access control list will be able to connect to your HomePlug AV, and

when Deny ACL MAC is selected, those are in the list will not be able to connect to the

HomePlug AV. The policy supports 20 sets of MAC address.

MAC Address

Enter a station MAC address in the blank field.

Comment

Maximum input is 20.

Save

After completing the setting on this page, click Save button to save the

settings.

Reset

Back to last saved data.

Delete Selected

Delete selected access control policy.

Delete All

Delete all policy in the access control list.