User's Manual

21
Security Setting
Select a security type for you HomePlug AV from the pull-down menu OPEN, WEP or
WPA.
Security
Mode
Select a security type from the pull-down menu OPEN, WEP or WPA.
The Default setting is OPEN. It is strongly recommended to set up
security mode (especially WPA2-PSK) to prevent any unauthorized
accessing.
WEP: Authentication can be selected in Open System, Shared Key or
Auto. There are several formats to enter the keys:
 Hexadecimal (WEP 64-bits): 10 Hex characters (0~9, a~f).
 Hexadecimal (WEP 128-bits): 26 Hex characters (0~9, a~f).
 ASCII (WEP 64-bits): 5 ASCII characters (case-sensitive).
 ASCII (WEP 128-bits): 13 ASCII characters (case-sensitive).
WPA-PSK & WPA2-PSK: WPA Cipher Suite can be selected in TKIP,
AES and Auto. There are two key formats to enter the key:
 Pass Phase: 8~63 ASCII
 HEX: 64 characters