User's Manual

- 25 -
How do I turn off my Wireless Thin Client?
• You can turn off your Wireless Thin Client by simply
going to the Start Menu and choosing ‘Suspend’. This will
put the device in standby mode. To resume your Wireless
Thin Client, switch the On/Suspend switch on the top of
your Tablet.
• Slide On/Suspend switch to the Suspend position, which
will turn off your Wireless Thin Client and ensure it isn’t
accidentally turned on by clicking on the buttons.
How do I restart my Wireless Thin Client? (If it
freezes / hangs up, or I just loaded new software)
• If you need to restart you Wireless Thin Client unscrew
your stylus, and hit the software-reset button on the side of
the Tablet. If your Wireless Thin Client is not responding to
any commands (that is, it freezes or hangs) you can use this
same reset button. The software-reset button will not affect
data on your Wireless Thin Client system.
• If your system freezes or hangs, and does not respond, even
after you hit the software reset button, first remove the
battery to restart the system. If this does not help the
situation, you will need to use the hardware reset button,
marked on the diagram below. Use a small Philips head
screw driver and remove the screws. Lift the cover and
press the reset button. Note that this will wipe all memory
from your Wireless Thin Client.
My screen is dirty, how can I clean it without
harm to the screen?
• Clean the screen with a soft, clean cloth and commercial
window cleaner that does not contain wax or abrasives.