User's Manual

- 18 -
B. Active Sync via a DB-9 RS-232 cable (two female connectors at
both ends).
Step 1. Cable Connection:
i. Plug one end to the RS-232 Connector (ΟΟ) at the right
side of the Tablet.
ii. Plug the other end to the RS-232 port in your PC/Laptop.
Step 2. PC setup:
Prerequisite: To make the connection, you will need to install the
ActiveSync 3.7 (or higher) software to your PC/Laptop. To
download this freeware, go to:
http://www.microsoft.com/mobile/downloads/activesync.asp
On your Tablet:
i. Go to Start →Settings→ Network and Dial-up
Connections.
ii. Double click Make New Connection.
iii. When Windows prompts you to type a name for the
connection, name the connection appropriately. Select the
connection type to be Direct Connection. Click Next.