User's Manual

- 13 -
3.2. Data Synchronization
To share information between your Wireless Thin Client and your
PC/Laptop, you need to establish a direct PC Connection. There are
two ways to make direct connection.
A. Active sync via USB port of the Cradle Station.
Step 1. Cable Connection:
i. Plug the USB Type B Connector of USB cable to the USB
Type B Port at the rear side of the cradle.
ii. Plug the USB Type A Connector of USB cable to the USB
Type A Port in your PC/Laptop.
Step 2. PC Setup:
Prerequisite: To make the connection, you will need to install the
ActiveSync 3.7 (or higher) software to your PC/Laptop. To
download this freeware, go to:
http://www.microsoft.com/mobile/downloads/activesync.asp
On your Tablet:
i. Go to Start →Settings→ Network and Dial-up
Connections.
ii. Double click Make New Connection.