User Manual

- 20 -
How do I restart my Wireless Thin Client? (If it
freezes / hangs up, or I just loaded new software)
• If you need to restart you Wireless Thin Client unscrew
your stylus, and hit the software-reset button on the side of
the Tablet. If your Wireless Thin Client is not responding to
any commands (that is, it freezes or hangs) you can use this
same reset button. The software-reset button will not affect
data on your Wireless Thin Client system.
• If your system freezes or hangs, and does not respond even
after you hit the software reset button, first remove the
battery to restart the system. If this does not help the
situation, you will need to use the hardware reset button.
Note that this will wipe all memory from your Wireless
Thin Client.
My screen is dirty, how can I clean it without
harm to the screen?
• Clean the screen with a soft, clean cloth and commercial
window cleaner that does not contain wax or abrasives.
Always apply the cleaner to the cloth, not the screen. If
the display contains grease or some other contaminant,
use isopropyl alcohol instead of commercial cleaner.
Note: paper toweling and other paper products are
abrasive. Be sure to use a clean cloth when wiping the
screen.
Can I protect my Wireless Thin Client with
password access?
• Yes, to protect your valuable information, you may want
to set up a password for your Wireless Thin Client. Go to
Start
→Setting→Control Panel → Password.
Remember your password and keep it in safety. If you
lost your password, the only way is to execute Hardware
Reset, but it will wipe out all the memory you saved.