User's Manual

5. Restart now to have the card take effect.
DOS Mode Installation
The pure DOS mode , not the DOS prompt under
the Windows 95 or Windows NT, doesn’t support
any PC Card device. Many BIOS vendors develop
the Card services and Socket Sevices for DOS.
Because the CardBus technology is new to market,
all the current shipping versions of Card and
Socket Services don’t support CardBus PC Card.
We implements the DOS driver sets with this
acknowledge in mind. All our DOS mode drivers
were built to include the Direct Enabler in them to
fulfill the essential of DOS mode Card Service
and Socket Service program.
Besides, We provide a menu driven installation
utility to help you install the various drivers in the
DOS mode. Just plug the driver diskette into the
floppy drive and set the current drive to the floppy
drive. Then run INSTALL to install the real mode
drivers such as ODI or NDIS 2.x or Packet Drivers
into the target disk.
Novell NetWare
There are two methods to install the Netware
client ODI driver, the menu installation and
Netware 3.12 or 4.x Client installation.
Menu Installation
1. Run INSTALL.EXE from the root directory
of driver diskette.
- 21 -