User's Manual

HARDWARE INSTALLATION
This chapter describes how to install the CardBus
10/100M dual-speed PC Card in your notebook
computer and connect it to network. It’s referred to
“the PC Card” in this manual.
The PC Card could be connected to either 100Mbps
Fast Ethernet or 10Mbps Ethernet. The PC Card has
the ability of automatic sensing and operating on
either speed without manual recofiguration.
After finishing the installation of PC Card into your
Notebook, please refer to Chapter.3 Software
Installation on how to install network drivers using
menu driven installation utility.
Inserting the CardBus Dual-Speed PC Card
1. Hold the CardBus PC Card with wide connector
toward the slot and the brand lable facing
upward.
2. Insert the CardBus PC Card and push it firmly
into the bottom. ( Please see the figuer on the
next page for reference)
Removing the CardBus Dual-Speed PC Card
It’s quite different for various computer mechanical
designs. Please refer to the PC Card removal
instruction in the document for your notebook
computer.
- 5 -