User's Manual

DNS server #1: /DNS server #2:
When the Internet Station is setup to “Obtain global port configuration automatically” and
it is connected to the ISP, it will obtain these two addresses from ISP automatically. You can
change the values according to ISP’s instruction.
SAVE: After completing the settings on this page, click “SAVE” to save the settings.
RESET: Click “RESET” to clear all the settings on this page.
Virtual Server
ADD Server
Single Port/Port Range: For selecting between a specific port and a range of ports which
you want the Internet users to be able to access. The valid port number ranges from 0 to
65535.
Port Type: please select the port type (TCP or UDP) for the port number that was entered
earlier.
Local Server IP Address: Enter the Local Server’s IP address (for the specified port entered
above).
ADD: Click “ADD” to add the local server in the Server List.
Note: Maximum 12 Server (port) entries are allowed and each port number can only be
assigned to one IP address.
RESET: Click “RESET” to clear the settings on the page.
Server List: The Local Server IP Addresses will appear on the screen.
List: If there is any Local Server in the Server List, click on the down arrow  to select the
desired Server Number on the list.
DELETE: After selecting the Server Number in the “List”, click on “DELETE” to remove
the Server from the list. You can only delete one Server at a time.
- 21 -