User's Manual

IP Address

• Default: 192.168.1.254

SubNetmask

• Default: 255.255.255.0

~Do not distribute IP address to local computers

Checking this radio button to disable this IP Sharing device to distribute IP Addresses

(DHCP disabled).

~Distribute IP addresses to local computers

Checking this radio button to enable this IP Sharing device to distribute IP Addresses (DHCP

enabled). And the following field will be activated for you to enter the starting IP Address:

Continuous IP address pool starts at

The starting address of this local IP network address pool. The pool is a piece of continous IP

address segment. Keep the default value 192.168.1.1 should work for most cases.

Number of IP address in pool

• Maximum: 128. Default value 128 should work for most cases.

Note: If “Continuous IP address poll starts” is set at 192.168.1.1 and the “Number of IP

address in pool” is 128, the device will distribute IP addresses from 192.168.1.1 to

192.168.1.128 to all the computers in the network that request IP addresses from DHCP

server (IP Sharing Device).

If you check this selection, remember you have to specify a static IP address for all your local computers.

- 18 -