User's Manual

CONFIGURATION VIA WEB
Assuming the workstation’s TCP/IP is set to obtain IP automatically and the IP Sharing
Device’s Local Port is set to “Distribute IP” (default), and all the cables are connected
correctly. Open the browser, enter the local port IP address (default at 192.168.1.254) of the
IP Sharing Device, and click “Go” to get the login page.
No user name or password is required for the first time login, click OK to continue when the
following dialog box appears.
At the setup home page, the left navigation pane where bookmarks are provided, links you
directly to the desired setup page. You can select Management, Local Port, Global Port,
Virtual Server, Packet Filter, Advanced Settings or Network Status.
Click on the desired setup page to expand the page in the main navigation pane. The setup
pages covered in this utility are described below.
Management
Change Administrator’s Password: Check and type in “new password”, and then at
“confirm password”, retype the new password to set/change the administrator’s password.
• Maximum: 6 alphanumeric characters (case sensitive).
- 16 -