User's Manual

passwd
• No password is required when logging in for the first time.
• At command>, type in passwd and hit “Enter” to enter the password setup screen.
• Password can be up to six characters long.
• Password can contain letters, numbers, and spaces.
• Password is case sensitive.
• To set or change your password, key in up to six characters and hit “Enter”. You will be
prompted to reenter your password again for verification. Return to the Start screen by
typing quit.
Test your new password to verify it has taken effect.
Example:
command>passwd
Please type old password :
type new password (0 to 6 characters) : ****
re-type new password (0 to 6 characters) : ****
ping
Ping is a basic Internet program that lets you verify that a particular IP address exists and can
accept requests. At command> type in ping and then the IP address that you wish to detect
and hit “Enter”. If the screen shows “reply ok!” from that IP, the device can communicate
with that IP address. If the screen shows “no response!” then that IP address is unreachable.
Example:
command>ping 192.168.1.1
Reply OK.
command>ping 192.168.1.5
No response!
command>
- 34 -