User's Manual

TERMINAL COMMAND
Type ? or help and hit “Enter” to list the main menu commands as below.
command>help
Dual Ethernet IP Share for Cable/xDSL Modem, version X.XX
=======================================================
Command Description
-------------------------------------------------------
help Show this message
session List active internet sessions
show Display active configuration
user List active local IP address leases
filter Set packet filters
passwd Change administrator's password
ping <x.x.x.x> Ping the specified host
tracert <x.x.x.x> Trace the specified host
release Abandon the dynamic Global port configuration
renew Refresh the dynamic Global port configuration
set Configure device in batch
connect Make PPPoE connection
disconnect Break PPPoE connection
status Show PPPoE connection status
vserv Publish internal server for access from internet
route Set static routing table
wantel Enable/Disable wan port telnet
upgrade Upgrade firmware
quit Exit to login prompt
reboot Restart device
======================================================
- 29 -