User's Manual

and both TDP and UTP ports). However, this makes your network vulnerable to Internet
attacks.
Can not access the Internet
For Cable Modem users, find the workstation’s “Computer” name and then input this
name in the device’s “Device/Computer Name” field. Do this only when your cable
Modem Internet Service Provider provides you with a specific “Computer Name”.
1. On the Workstation (95, 98, and ME), go to Start ÆControl Panel Æ Network, and
select Identification tab. Copy the Computer name as shown in the left figure below. For
Win2000, right click on “my computer”, select “properties”, click on “network
identifications”, click on “properties”, and then copy the computer name.
2. Run the GUI setup program, select the device, and click on “Configure” to go to the
Management tab.
3. Paste the name on to the field “Device/Computer Name” as shown in the right figure
below.
Figure 22
For DSL PPPoE users, open the Management page, at the PPPoE Username filed, enter
the Username follow by your ISP’s domain name and then click “Save”. For example,
[e-mail], which is composed by username (provided by your ISP) followed
by your ISP’s domain name.
- 49 -