User's Manual

C. Enter one of the port numbers or a port range that your application requires. Press
"Browse" to select the Local server mapping to the port(s) number you just entered.
Figure 20
D. Select the internal server (the computer that is using the Internet Application) in the
following window.
Figure 21
E. Press Add. Repeat this process for each individual port you need to open.
F. Press Save. Wait 30 seconds for the device to reboot and then try the application again. It
may be necessary to restart your application or your computer for the application to recognize
the change.
Note: In rare occasion that the Internet Application requires a random number of ports to be
opened, in this case, configure the Virtual Server to open all ports (range from 1 to 65535
- 48 -