User's Manual

FIRMWARE UPGRADE
Upgrading the firmware
1. Connect the device to a computer that can configure the device using the GUI. Copy the
latest firmware to the directory where the setup.exe is located or to any desired location
on the hard driver (e.g. C:\IPS).
2. Back to the management utility window, click on “File” from the Tool Bar, select
“Find Device” from the drop down menu. You will see a list of the IP Sharing Devices
on the screen. Select the one that you are going to update the firmware and click
on
the Tool Bar. The Upgrade Firmware window will appear.
3. If you have copy the latest firmware to the directory where setup.exe is, click on
“Default File” and click “Start”, the program will upgrade the firmware with the latest
version of firmware, (i.e. firmware.bin). If you copy the firmware file to a desired
location, in the Upgrade Firmware window, select “Specify File”, enter the firmware
file’s path (e.g. C:\WINDOWS\Desktop\firmware.bin), and then click “Start” to
upgrade the firmware.
4. The upgrade will take a couple of minutes to complete, do not interrupt the process.
After the upgrade process completes, you will see a “Finish” button, click on it to finish
the procedure.
- 42 -