User's Manual

Example 1: PPPoE connection was already made.
command>connect
Already connected.
Example 2: To manually make a PPPoE connection.
command>connect
Connecting…
Í System is making a PPPoE connection.
Example 3: When PPPoE was not enabled, no connection can be made. Refer to
command “set” for setting up PPPoE.
command>connect
PPPoE is not enabled.
disconnect
Cut off a PPPoE connection manually when PPPoE is enabled.
Example 1: PPPoE connection was already disconnected.
command>disconnect
Already disconnected.
Example 2: To manually cut off a PPPoE connection.
command>disconnect
Disconnecting…
Í
System is cutting off a PPPoE connection.
Example 3: When PPPoE was not yet enabled, no disconnection can be made. Refer to
command “set” for setting up PPPoE.
command>connect
PPPoE is not enabled.
status
Display the current PPPoE connection status.
Example 1: PPPoE is enabled and the connection is successful.
command>status
PPPoE connected.
Example 2: PPPoE is enabled but the connection is cut off.
command>status
- 38 -