User's Manual

Facts and Tips
1.Press the battery compartment Cover-Release
 button on the headset to open the cover and
 insert two 1.5volt, AAA batteries.
2.Open the battery compartment cover from the back of
 the transmitter and insert two 1.5volt, AAA batteries
3.Slide the Headset power switch on, the LED
 light will turn green.
4.Slide the Transmitter power switch on, the LED light
 will turn red and start pairing with the headset. Once
 the pairing is finished, LED light will turn to blue color
 and flash steadily.
5.Plug the transmitter to your iPod or any music
 player and enjoy cordless stereo music. When
 finished, make sure to turn off both transmitter
 and headset to conserve battery power.
1)Working distance is 30ft, actual distance will depending upon the battery power level, walls, doors, furnitures and
 position angle of the transmitter and headset.
2)Bluewave can be used with other audio device like MP3 player, CD player, TV and computer etc. Additional cable
 adapter maybe required.
3)Headset also support Bluetooth enabled PC computers. However, the quality of the stereo depends on the OS
 support. Please check our website for update information.
4)Rare static (noise) in the headset is normal. Occasional static may indicate low battery power level or transmitter/
 headset are too far apart. Move headset closer to transmitter. If static situation does not improve, replace batteries
 on transmitter and headset.
5)Either alkaline or rechargeable AAA batteries can be used. Battery lasts 2 to 8 hours typically.
6)Music playback volume can be adjusted from iPod and/or headset.
6.To stream music to stereo system, please follow step 1 to
 5, then put headset next to stereo system, connect the
 audio cable from line out jack on the headset to AUX/Video
 RCA jack (both left and right channel.) In stereo system
 select AUX/Video mode, now everyone can start enjoying
 music from iPod through your stereo system.