AP-6000 In-line, Voice Activated Telephone Dialer User Manual Dialer Rev 1.01 To contact Ablephone: Send us an email to able-phone@juno.
Visit us on the web at www.ablephone.com 1............................................................................................................................AP-6000 3...............................................................................................................A word from us 3............................................................................................................About this manual 4..................................................................................
A word from us This Dialer is the new successor in the Dialer line of products. Years of experience, market feedback, and use of the latest voice-recognition technology have enabled us to build the most advanced voice-recognition phone dialer in the world. We appreciate your trusting us by purchasing this product, and we wish you a long and enjoyable experience with it. Voice recognition is breaking new ground every day and is being used in more and more everyday appliances and devices.
Chapter One This chapter describes how to install Dialer, add names, erase a name or all names, listen to stored names, and, most importantly, dial a name using only your voice! Installing Dialer To use Dialer, install it by following these three steps: Connect the supplied power adaptor to the AC wall outlet and to the Dialer jack marked ‘Power’. When the power is applied, you should see two bright blue lights light up, one on the 'phone' jack and the other on the 'line' jack of the Dialer unit.
C. Dialer is shipped with a blank memory. Pick up the handset. The unit will play back the main menu. Press ‘1’ to add a new name. D. When asked, say the name to be added. Speak clearly but as normally as possible. When prompted to repeat the name, do so. If the training of the name has been successful, Dialer will ask you for the corresponding phone number.
Voice dialing Please follow these easy steps to dial: Pick up the handset. If you have already trained Dialer with names, it will ask you for name to dial. If you have trained it only with digits, it will ask you for a number to dial. At the prompt, say the name you wish to call or the first digit of the number you wish to voice dial. A. If you said a name, Dialer will playback the recognized name and will dial the corresponding number. If Dialer did not recognize the name, you will be asked to try again.
If you would like to dial a number manually, do the following: 4. a. Pick up the handset. b. After Dialer prompts you for a name to call, press any of the dialing keys except the pound key (#). Dialer will connect you directly to the telephone line so that you can dial manually. Dialer is based on speaker-dependent voice-recognition technology. This means that only the person who trained Dialer can use it. However, two or more users can share Dialer.
Press the ‘4’ key. Dialer will start playing back the names it has stored in its memory. B. When you hear the name you wish to erase, press any of the dialing keys, except the pound key (#). Dialer asks you to confirm the erasure of the name by pressing the ‘5’ key. [Any other action (for example, hanging up) will cause the name not to be erased.] C. Press the '5' button. The name will be erased and Dialer will return to the main menu.
Chapter Two This chapter describes how to dial a number during a call, work with a speakerphone, enable Dialer to work when connected to a Private Branch eXchange (PBX), and change the spoken language. Dialing a number during a call (currently works only with the US / UK languages selected) While in a call, you can activate the name-dialing or digit-dialing function again in order to transmit DTMF tones needed for online banking services, calling cards, etc. To activate this feature, do the following: A. B.
Pick up the handset. If names are stored, Dialer asks you for a name to call. Press the pound key (#). B. While hearing the main menu, press the '7' key to toggle between 'handset mode' and 'speakerphone mode'. Select 'speakerphone mode'. A. Working with the Clarity RC200 speakerphone Dialer has a unique operational mode, called "Basic" which is specifically designed to work with the RC200 speakerphone.
prefix digit, such as 9, and only then dial the actual number. If there is a need to set a prefix digit for all the stored numbers (as when moving from a private residence to a nursing home), do the following: Pick up the handset. If names are stored, Dialer asks you for a name to call. Press the pound key (#). B. Upon hearing the main menu, press the '8' key. Dialer will now ask you to set the digit that will serve as the external line access digit. Press the desired digit.
If that did not help, make sure the power is on. You should see two bright blue lights turned on. Then check that all of the connections from the phone to Dialer and from Dialer to the line are both correct and secure. Check especially that you have connected your phone to the ‘phone’ jack and the line to the ‘line’ jack on Dialer. If you reverse these connections, Dialer will not work and you will hear nothing. If you still cannot hear anything, connect the phone directly to the line, without Dialer.
Data Operating voltage DC Jack type Maximum power consumption Phone/ Line jack type Dialing Method Maximum number of names to be stored Type of memory device Max number of digits per name Max name record/playback length Minimum Data retention time (Weight (No power supply or cables Physical Dimensions Working Temperature Approvals Value .Volts DC, regulated 12 mm, polarity un-important 2.1 850milliwatts RJ11 (DTMF (Dual Tone Multiple Frequency 45 Flash 45 Seconds 3 Years 15 (Grams (0.
outside their published maximum ratings; or (b) products which have been repaired, altered, or modified by anyone other than an authorized representative of G.G. Electronics Ltd; or (c) damages caused by failed components, parts or accessories not sold by G.G.