User Guide

Quick Start Guide
Chester Creek VisionBoard
™
Wireless
Black or White Keys
04/17 Rev. A
Compatibility
This keyboard is designed for computers and tablets with a USB Type
A port and Windows XP or newer. This keyboard was not tested for
compatibility with macOS, iOS, Google Chrome, or Android, but may
also be compatible with some devices running these operating systems
via a USB Type A port.
Warranty/Repair/Return Information
AbleNet manufactured products include a two-year limited warranty.
This warranty is against defects in materials and manufacturing for two-
years from the date of purchase. Warranty in full text, along with return/
repair information is available at www.ablenetinc.com.
FCC
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Consult AbleNet Technical Support or your local Distributor for help.
Step 1: Install Batteries
The battery compartment is located on the bottom of the keyboard.
1. Remove the two Phillips-head screws and set aside
2. Remove the battery compartment cover by sliding it in the
direction indicated by the arrow
3. Insert two alkaline AAA batteries
4. After batteries are installed, carefully replace the battery cover and
secure in place with the two screws
Step 2: Connect Keyboard to Device
The USB receiver is located on the bottom of the keyboard.
1. Remove USB receiver from bottom of keyboard
2. Insert USB receiver into a USB Type A port on your device
3. Your keyboard is now ready to use
Optimal operating distance is up to 30-ft (10-meters) away from device.
Operating distance can be affected by the environment and obstacles
between the wireless keyboard and USB receiver.
Low Battery Alert
When the LED indicator light next to the space bar begins to flash, it is
time to replace the keyboard’s batteries.
AbleNet, Inc.
2625 Patton Road
Roseville, MN 55113
www.ablenetinc.com
[phone] or [phone]
About Your Keyboard
(Black Keys Shown)
LED Indicator Light
Adjustable
Feet
Battery
Compartment
USB
Receiver