User guide

3. When Pendant learning has been successful you will

hear “All Systems are OK” and then it will announce

the call setting that the base is set to – Friends 911

Mode, Friends Only or 911 Only.

• If “Base and Pendant out of Range” or “Pendant

Learning Failed” is heard from the Base or Pendant,

STOP - wait 30 seconds and start at step #1 again.

Notes:

• You have up to 45 seconds after pushing the RED Code

Learn button on the base unit to get the pendant to

enter “Pendant Learning” Mode.

• Teaching additional pendants does not erase previously

learned pendants.

• The base unit will automatically exit the pendant learn-

ing mode after several seconds or if Pendant Learning

Failed.

• When more than 1 pendant is paired with the base, the

base unit will announce the pendant number when do-

ing testing like the battery test.

At a later point in time, you might want to erase your

previously learned Pendants. You can erase all previ-

ously learned Pendants by simply holding down the

red Code Learn button at the back of the Base unit for

8 seconds. You will hear the conﬁ rmation of “Previous

Pendant Codes Erased” from the Base unit. After that,

you can program a new Pendant to the base unit follow-

ing the steps above as desired.