User's Manual

A-1

Siemens 9751 9006i DTMF Integration Guide

OL-1747-02

APPENDIX

Exiting and Starting the Cisco Unity

Software and Server

Exiting the Cisco Unity Software

This section provides two procedures for exiting the software: from the

Cisco Unity server and from another computer.

To exit the Cisco Unity software from the Cisco Unity server

Step 1 If the system uses the automated attendant, route all calls to the operator.

Step 2 Log on to Windows as a Cisco Unity administrator.

Step 3 Right-click the Cisco Unity icon in the status area of the taskbar.

(If the Cisco Unity icon is not in the taskbar, browse to the Commserver directory

and double-click AvCsTrayStatus.exe.)

Step 4 Click Stop Cisco Unity. Cisco Unity stops running when all calls are finished. An

“X” then appears in the Cisco Unity icon.

Step 5 Press Ctrl-Alt-Delete, then lock or log off Windows to prevent access by

unauthorized users.

To exit the Cisco Unity software from another computer

Step 1 If the system uses the automated attendant, route all calls to the operator.