User's Manual

Chapter 1 Siemens 9751 9006i DTMF Integration
Testing the Integration
1-16
Siemens 9751 9006i DTMF Integration Guide
OL-1747-02
Step 8 On the Status Monitor, confirm that the state of the port handling the call changes
to “Idle.” This state means that the port was successfully released when the call
ended.
To return Example Subscriber to the default settings
Step 1 In the Cisco Unity Administrator, go to Subscribers > Subscribers > Call
Transfer.
If Example Subscriber is not displayed, click the Find icon (the magnifying glass)
in the title bar, then click Find, and select Example Subscriber in the list that
appears.
Step 2 Under Transfer Incoming Calls, click No (Send Directly to Subscriber’s
Greeting).
Step 3 In the navigation bar, click Profile to go to Subscribers > Subscribers > Profile.
Step 4 In the Extension field, enter 99990.
Step 5 Click the Save icon.
Step 6 In the navigation bar, click Messages to go to Subscribers > Subscribers >
Messages for Example Subscriber.
Step 7 Under Message Waiting Indicators (MWIs), uncheck Use MWI for Message
Notification.
Step 8 Click the Save icon.