User's Manual

Chapter 1 Siemens 9751 9006i DTMF Integration
Programming the Phone System
1-4
Siemens 9751 9006i DTMF Integration Guide
OL-1747-02
Integration Features
The Siemens 9751 9006i integration with Cisco Unity provides the following
features:
If your phone system uses the CorNet network, all the integration features will be
available and will function normally.
Programming the Phone System
If you use programming options other than those supplied in the following
procedure, the performance of the integration may be affected.
If you want to remap extension numbers (for example, when multiple subscribers
use a single phone, or when multiple extension numbers on a single phone should
go to a single subscriber greeting), see Appendix B, “Remapping Extension
Numbers.”
Perform one of the following procedures to match the voice connectivity between
the phone system and Cisco Unity.
Call forward to personal greeting
When an incoming call is routed to an
unanswered or busy extension, the call is
forwarded to the voice mail of the subscriber.
The caller then hears the personal greeting of
the subscriber and can leave a message.
Message waiting indication
When a message is waiting for a subscriber,
Cisco Unity notifies the phone system to
activate the message waiting indicator (MWI)
on the subscriber’s extension (a lamp or a
stutter dial tone).