Instructions / Assembly

ManualsBrandsAble Life ManualsBasic MobilityAble Tray

Stander

Live the longer life you love®

Tel: 800.506.9901 ▲ Fax: 435.787.2301 ▲ 74 Canterbury Cir ▲ Logan, UT 84321 ▲ Stander.com ▲ Sales@Stander.com

Assembly Instruction Sheet

Parts List:

Step 1:

Pivot Upright stationary tube into the

vertical position as shown in Figure 1 and

insert the Upright bolt through the large

hole in the plastic cover located at the

base of the Upright stationary tube and

tighten the Upright bolt with the Allen

head wrench.

Figure 1

Summary of content (4 pages)

PAGE 1
Stander ® Live the longer life you love® Tel: 800.506.9901 ▲ Fax: 435.787.2301 ▲ 74 Canterbury Cir ▲ Logan, UT 84321 ▲ Stander.com ▲ Sales@Stander.com Assembly Instruction Sheet Parts List: Step 1: Pivot Upright stationary tube into the vertical position as shown in Figure 1 and insert the Upright bolt through the large hole in the plastic cover located at the base of the Upright stationary tube and tighten the Upright bolt with the Allen head wrench.
PAGE 2
Step 2: To properly assemble the Handle assembly into the Upright stationary tube, the Handle assembly bushing must be fully inserted into the Upright stationary tube. This can be accomplished by fully inserting the Handle assembly so that the Spring loaded button moves past all of the holes in the Upright stationary tube. Continue to push down on the Handle assembly until it forces the Handle assembly bushing to fully engage the Upright stationary tube.
PAGE 3
Step 4: Place the assembled product along side of the couch or chair that you plan to use. Adjust the Base adjustment tube to the appropriate length such that the furniture legs of the couch or the chair are centered on the rubber pads of both the Base adjustment tube and the Base stationary tube as shown in Figure 4 and Figure 5.
PAGE 4
WARNING: Please read before using this product. 1. Standers Medical Assist Products are devices intended for use by disabled persons to provide minimal to moderate weight support while standing and walking. 2. Serious injury or death can result if the product is not properly installed. Standers Inc. is committed to providing safe products and informing the user of ways to prevent accidents.