Instructions

16
OPERATION
Wallbox
7 Operation
Once the charging box has been connected to the power supply,
start the charging cycle by inserting the charging plug into the
charging socket at the vehicle or the charging box.
The charging cycle starts automatically (see charging cycle).
Interrupt or stop the charging cycle by disconnecting the plug
from the vehicle.
7.1 Removing the charging plug from the charging box
Remove a IEC Type I charging plug by pressing the button and
extracting the plug in the displayed direction.
Remove a IEC Type II charging plug by lifting the plug as displayed
and then extracting it from the holder.
7.2 Charging cycle
Versions with integrated charging cable and plug
· Remove the plug from the charging station
· Insert the plug into the vehicle socket
Charging cycle starts automatically
· Disconnect the plug from the vehicle and place it back
in the charging station
Versions with integrated charging socket;
external charging cable
· Insert the charging cable in the vehicle -
socket and in the charging station
· The charging cable is locked in the charging socket
Charging cycle starts automatically
· Disconnect the charging cable from the vehicle
Charging socket unlocks automatically
· Disconnect the charging cable from the charging station