Instructions

14
WALL INSTALLATION
Wallbox
5 Wall installation
5.1 Opening the charging box
Open the housing to install the charging box correctly.
Disassemble the 4 screws of the plug insert or the socket insert.
Subsequently use the insert recess to lift up and remove the front
cover from the rear unit as shown.
CAUTION:
Fix the LEDs for the illuminated rings in the front cover after
installing the rear unit. Pay attention to the labelling.
5.2 Wall installation
Specialist staff familiar with the attachment situation should use
the provided centring guides to drill the holes for attachment and
the feed cable. Make sure the lower part of the rear unit is secured
sufficiently, where the charging cable exists the box, as this section
absorbs the forces created by cable. Preferably use the red attach-
ment points.
A drilling template supplied with this manual facilitates installation.
CAUTION:
Ensure that protection class II is still provided after installing the
rear unit.

Plug insert