User's Guide

KH667111xx

Coder CMB-1

14.05.2020 / FRM

Seite

page

5 Integration Instructions

for host product manufacturers according to KDB 996369 D03 OEM Manual v01

5.1 List of applicable FCC & RSS rules

Part 15.247

RSS-247

5.2 Specific operational use conditions

This module is approved for use in portable and mobile applications. Integrators must supply operating

instructions for end users and installers to satisfy RF exposure compliance requirements are met. Integrators

and installers must also make sure that compliance with Part 15B are ensured.

5.3 Limited module procedures

N/A, a full modular approval is targeted.

This module is compliant with Chapter (b) from §15.212.

5.4 Trace antenna designs

N/A, the module does not use a trace antenna, it uses an external dipole antenna

5.5 RF exposure considerations

WARNING:

In order to comply with the FCC RF Exposure limits, the end customer has to assure that the antenna of the

device has a distance of more than 8mm from the human body for bodyworn devices.

For handheld devices, no distance is needed.

In order to comply with the ISED RF Exposure limits, the end customer has to assure that the antenna of the

device has a distance of more than 15mm from the human body for bodyworn devices.

For handheld devices, no distance is needed.

Nevertheless, this device should be used in such a manner that the potential for human contact during normal

operation is minimized. However, the OEM integrator is still responsible for testing their end-product for any

additional compliance requirements required with this module installed (for example, digital device emissions,

PC peripheral requirements, etc.).