User Guide

3-14 Chapter 3
3-5. Integrated Peripherals
VIA OnChip IDE Device:
Click <Enter> key to enter its submenu:
SATA RAID ROM:
This item allows you to use the boot ROM of onchip Serial ATA RAID to boot-up system.
IDE Bus Master:
This option enables or disables the IDE bus mastering capability under the DOS environment.
IDE Prefetch Mode:
Leave this item to its default [Enabled] setting to allow the data and addresses to be stored in the internal
chip buffer. This is helpful in reducing access time to achieve better performance.
Onboard IDE-1 Controller:
This item allows you to enable or disable the primary and secondary IDE controller. Select [Disabled] if
you want to add a different hard drive controller.
Onboard IDE-2 Controller:
The description is same as the Onboard IDE-1 Controller.
VT7