User Guide

3-12 Chapter 3
AGP Fast Write:
This item determines the AGP Fast Write feature, a technology that allows the CPU to write directly to
the graphics card without passing anything through the system memory so as to improve the AGP speed.
Set to [Enabled] only when the installed AGP card supports the function.
AGP Master 1 WS Write:
When set to [Enabled], one wait state is inserted to the AGP write cycle, allowing for greater stability.
AGP Master 1 WS Read:
When set to [Enabled], one wait state is inserted to the AGP read cycle, allowing for greater stability.
AGP 3.0 Calibration cycle:
This item controls the time cycle between AGP and North Bridge. You may try the [Enabled] option if
problems occurred when using some graphics cards of AGP 3.0 specifications.
NOTE: This item appears only when installing graphics card of AGP 3.0 specifications.
 Back to Advanced Chipset Features Setup Menu:
CPU & PCI Bus Control:
Click <Enter> key to enter its submenu:
PCI Master 0 WS Write:
[Enabled]: Writes to the PCI bus are executed with zero wait state (immediately) when PCI bus is ready
to receive data.
[Disabled]: The system will wait one state before data is written to the PCI bus.
VLink 8X Support:
[Enabled]: The speed of VLink that links the North Bridge and South Bridge is 8x.
[Disabled]: The speed of VLink that links the North Bridge and South Bridge is 4x.
VT7