User guide

5 TX5 Controller Software
Sounds
The scanner has a built-in loudspeaker and some scanner events are signaled by sounds. You can
switch sounds on or off and change their volume.
Volume – Increase or decrease the volume of the scanner sounds.
Touch pad clicks – Switch on or switch off sound to confirm button clicks.
Sound during scanning – If switched on, the scanner gives a warning signal when the laser is
switched on and the scanner is scanning.
Sound when scan is finished – If switched on, the scanner sounds to confirm scan completion.
Sounds when warnings are issued – If switched on, the scanner sounds when a warning is issued.
Sounds when warnings are issued – If switched on, the scanner sounds when an error is issued.
Trimble TX5 3D Laser Scanner User Guide 76