User guide

5 TX5 Controller Software
Customer – If you are carrying out the scan project by order of a company, you can enter its name
here.
File Base Name – The scan will be saved with a file name consisting of this base name followed by
the current scan number.
Initial Scan No. – Automatically increments with each successive scan. Can be reset and may be
used to indicate the number of scans per scan session.
Additional Info – Additional project information.
Latitude [°] – If known, enter the approximate (+/- 10° is sufficient) latitude position of the scan
project here. This information helps to improve the calibration of the inclination sensor and leads to
more precise inclination data and thus to better scan registration results. Please enter the latitude
value in decimal degree notation.
Editing a scan project
To edit a scan project, select it in the list and tap it once again to view the details screen.
Trimble TX5 3D Laser Scanner User Guide 69