User guide

2 Safety Precautions and Maintenance
Resolution Quality Repetition rate
(Hz)
Pulse duration (µs) NOHD (m)
Mio. Pts (full scan) axial radial
2.8 1/16 8x 12 22.686 12.50 4.20
1.8 1/20 4x 60 186.912 3.80 0.40
1.8 1/20 6x 30 22.686 6.30 1.70
1.8 1/20 8x 15 22.686 10.60 3.30
0.7 1/32 4x 95 116.820 2.70 0.10
0.7 1/32 6x 48 233.640 4.50 0.90
0.7 1/32 8x 24 22.686 7.50 2.10
When working with the laser scanner you should be aware of the following laser safety measures:
WARNING – This product employs a laser system. To prevent direct exposure to the laser beam, do not attempt
to open the enclosure.
WARNING – Use of controls or adjustments or performance of procedures other than those specified in this
manual may result in hazardous radiation exposure.
l
Avoid looking into the direction of the laser. Avoid direct eye exposure, do not stare into the
laser beam and do not direct it to other people.
l
Do not view the laser beam directly with optical instruments.
l
Do not place mirrors or objects with reflective surface into the beam. The mentioned safety
measures are also valid for the reflected laser beam.
l
The scanner should be operated by trained personnel only.
l
The customer should assess the proper functioning of the delivered laser scanner at regular
intervals. You should immediately stop further use of the laser scanner if any failure is found. It
should be regularly checked and certified by a Trimble service provider. The service intervals
should not exceed a maximum period of one year. For more information, contact your Trimble
dealer.
l
Respect the safety precautions and control measures that are specified in IEC 60825-1:2007, Ed
2.0. Also respect differences to the mentioned safety precautions and control measures that
may exist in national or regional publications.
Trimble TX5 3D Laser Scanner User Guide 18