User Guide

Introduction of SR7-8X Features
User’s Manual
2-3
# The Switching Power Supply must meet ATX 2.03 specification with ATX12V1 Power
connector.
# Supports Wake On LAN, Wake On Ring, but your ATX power supply 5V standby power must
be able to provide at least a 720mA current capacity. Otherwise, the functions may not work
normally.
# This motherboard supports the standard bus speeds of 66 MHz/100 MHz/133 MHz that are
used by specific PCI, processor and chipset specifications. Exceeding these standard bus speeds
is not guaranteed due to the specific component specifications.
# Specifications and information contained in this manual are subject to change without notice.
Note
All brand names and trademarks are the property of their respective owners.
2-3. Item Checklist
Check that your package is complete. If you discover any damaged or missing items, please contact your
retailer or dealer.
$ One ABIT SR7-8X Motherboard
$ One 80-wire/40-pin ribbon cable for master and slave Ultra DMA 133, Ultra DMA 100, Ultra DMA
66 or Ultra DMA 33 IDE devices
$ One ribbon cable for 3.5” floppy disk devices
$ One compact disc for support drivers and utilities
$ One Rear I/O shield bracket
$ One USB cable
$ One user’s manual for the motherboard