User Guide

Quick Installation A-5
There is no specific orientation for pins 1 and 2.
Insert the two-threads hardware reset connector into the correct pins of connector on
the mainboard.
Connector SM5 (J6) SM5-A(J5)
Pin number Name of the signal or signification
1 Ground
2 Hardware Reset Signal
There is no specific orientation for pin 11
to pin 14. Connect the four-threads speaker cable to the correct pins of connector
on the mainboard.
Connector SM5 (J6) SM5-A(J5)
Pin number Name of the signal or signification
11 +5VDC
12 Ground
13 Ground
14 Sound Signal
There is not specific orientation
for pins 8 and 9. Connect the two-threads connector to the correct pins of
connector on the mainboard.
Connector SM5 (J6) SM5-A(J5)
Pin number Name of the signal or signification
8 Anode terminal of Turbo LED
9 Cathode terminal of Turbo LED
H/W Reset connector:
Installing speaker connector:
Installing Turbo LED connector: