User`s manual

5-16 Chapter 5
save b <filename> Read ROM and save to <filename>.
compare k <filename> Read ROM and compare with <filename>.
tv x <filename> Transfer TV data from file to EEPROM.
version v <filename> Display file version and ~CRC32 (if no filename, acts on ROM).
erase e Erase the ROM.
display d [bytes] Display 256 the first bytes of the EEPROM (default is 256 bytes)
check c Check for supported EEPROM.
nolight l Don't light keyboard LEDs.
overridetype 5 Don't pause if file & chip PCI VenID/DevID mismatch.
overridesub 6 Don't pause if file & chip PCI subsystem ID mismatch.
reboot y Reboot the PC after other tasks completed.
protecton w Write protect ROM (only works on some ROMs).
protectoff r Remove ROM Write protect. (only works on some ROMs).
straps m <straps> Change soft straps.
format is: AND Mask 0, OR Mask 0, AND Mask 1, OR Mask 1
keepstraps g Keep the soft straps already present in the EEPROM after
flashing the new image.
romstrap j Override the ROM strap setting to allow flashing an image when
grounding the STRAP_SUB_VENDOR pin. This allows flashing
a corrupted or erased EEPROM.
Note: Make sure there is a physical EEPROM present when using
this option
guid q <guid> Set the IEEE 1394 GUID in the ROM image (GUID is in the form
of 16 hex digits).
guidsource 1 <location> Set the source of the IEEE 1394 GUID.
main
- main EEPROM image
dedicated - separate serial EEPROM part
list a List all NVIDIA display adapters found in the system.
index i <index> Force a specific device index.
help ? Display this screen.
silence s <level> Silence level:
default All beeps.
#=4 (or 2) No progress beeps.
#=5 (or 1) No beeps.
override o <level> Override safety check level:
default unknown EEPROM | NV chip aborts application.
level=1 unknown EEPROM acceptable for read operations.
level=2 unknown NV chip acceptable for read operations.
level=3 Combined effect of 1,2 (cannot write to unknown EEPROM or chip).
directpci n Bypass the PCI BIOS.
listver List BIOS versions of all adapters found.
Siluro FX Series