User`s manual

5-10 Chapter 5
Drag the slider to adjust the GPU core
temperature limit. Click OK to apply
the new setting; click Cancel to delete
the changes you’ve just made. The
normal working temperature is generally
under 75°C (135°F). To use default
settings, simply press the Set Default
button.
Beeper Enable: If the core temperature
exceeds the set limit, the warning beeper
will ring up.
System Shutdown: If overheating lasts for more than 30 seconds, the system will
automatically shut down.
NOTE: For protecting your system, we strongly recommend you to enable the above
two functions.
Enable the Smart Fan function,
otherwise, the fan would run at full
speed.
: Red Area – the fan will run at
high speed.
: White Area – the fan will run
at middle speed.
: Blue Area – the fan will run at
low speed.
Click OK to apply the new setting; click
Cancel to delete the changes you’ve just
made. To use default settings, simply press the Set Default button.
Siluro FX Series