User Guide

SI-1Na
B
B
r
r
i
i
e
e
f
f
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
G
G
u
u
i
i
d
d
e
e
(A complete user’s manual is also available
via browsing the Driver & Utilities CD.)
Features & Specifications
CPU
• Supports single Pentium 4 478-pin processor up to
2.8GHz (based on 400MHz FSB)
Chipset
• Intel

845GL chipset Memory Controller Hub (MCH)
• Supports PCI 2.2, Ultra ATA/100 IDE protocol
(ICH4)
Memory
• Two 184-pin DIMM sockets support PC1600/PC2100
un-buffered low profile memory
• Up to 2GB, none ECC memory capacity
LAN
• Intel 82550EY
• Dual 10/100Mbps LAN Ports
• Support IPsec feature
Graphics
• Integrated graphics support featured by 845GL
PCI Extension Slot
• 1 PCI 32bit/33MHz extension slot
Storage
• 1 Ultra ATA/100/66/33 IDE channel connector (by
ICH4)
Internal I/O Headers
• 2 USB headers (support 4 USB ports)
• 1 VGA pin header
• 1 COM port pin header (for COM2)
• 1 Parallel port pin header
• ATX12V PSU connector
External I/O Connectors
• 1 VGA connector
• 1 COM port c
4200-0361-02 Rev. 1.01
onnector (for COM1)
• PS/2 keyboard connector
• 2 RJ-45 LAN connectors
System BIOS
• Phoenix/Award Plug and Play BIOS
• 4M-bit Flash ROM
Form Factor
• 9.6” x 9.6”
Miscellaneous
• DOM (Disk On Module) Support
• Hardware monitoring, ACPI, Wake on LAN
• Support both 3.3V and 5V PCI Riser Card
Note: All brand names and trademarks are the property of
their respective owners.
Connectors, Headers, and Jumper
Note: Always power off the computer and unplug the AC
power cord before adding or removing any peripheral or
component. Failing to do so may cause severe damage to
your motherboard and/or peripherals. Plug in the AC
power cord only after you have carefully checked
everything.
ATXPWR1/ATX12V1 Connector:
• Connects to ATX power supply. (The ATX power
supply unit must meet ATX2.03 specification with
Standard ATX/ATX12v/AUX ATX power
connectors.)