User Guide

Installing the VGA Driver for the Windows
®
NT 4.0 Server/Workstation E-1
User’s Manual
Appendix E. Installing the VGA Driver for the
Windows
®
NT 4.0 Server/Workstation
In this section we will show you how to install the VGA driver to your Windows
®
NT 4.0
Server/Workstation operating system. All screen shots are from Windows
®
NT 4.0 server version. Before
you install the VGA driver, please install Windows
®
NT 4.0 Service Pack 4 (or latest version) first. Then
you can install the VGA driver.
Note: Details of the Windows
®
NT 4.0 Server/Workstation operating system are not mentioned in this
manual. If you have any problems with the settings, operating or installing Windows
®
NT 4.0
Server/Workstation, please refer to your Windows
®
NT 4.0 Server/Workstation user's manual or other
databases provided by Microsoft
®
Corporation.
Note: For Windows
®
NT 4.0 Server/Workstation operating system, you don't need to install the INF
Installation Utility. But you have to install the Windows
®
NT 4.0 Service Pack 4 (or latest version)
first.
Insert the SE6 CD-Title into your CD-ROM
drive, it should execute the program
automatically. If not, you can go to the CD
location and execute the execution file at the
main directory of this CD-Title. After it has
been executed you will see the screen below.
Move the cursor to “Drivers” and click on it to
go on.
Move the cursor to “Intel 815 Graphic Driver”
and click on it to go on.
Move the cursor to “Win NT” and click on it to
go on.