User Guide

INF Installation Utility for Windows
®
98 SE A-1
User’s Manual
Appendix A. INF Installation Utility for Windows
®
98
SE
After you’ve installed Windows
®
98, you need to install the driver for your IDE & USB devices. We will
tell you step by step in the following section how to do this.
Note: You have to install the INF Installation Utility before you install the VGA and audio driver.
After installing Windows the quality of your display will be poor because it will be set to 640*480 and
16 color. For the best screen capture quality, install the VGA driver and set the desktop to 800*600
using True Color.
Note: Details of the Windows
®
98 SE operating system will not be mentioned in this manual. If you
have any problems with Windows
®
98 SE installation, operations and settings, please refer to your
Windows
®
98 SE user's manual or other resources provided by Microsoft
®
Corporation.
Insert the SE6 CD-Title into your CD-ROM
drive, it should execute the program
automatically. If not, you can go to the CD
location and execute the execution file at the
main directory of this CD-Title. After it has
been executed you will see the screen below.
Move the cursor to “Drivers” and click on it to
go on.
Move the cursor to “Intel INF Installation
Utility” and click on it to go on.
Move the cursor to “Install” and click on it to
go on.